Supermicro 16-DIMM Xeon Dual-Core Blackford Serverboard X7DBE+ (MB ONLY)

Description

Specifications
Product SKUs
MBD-X7DBE+-O
·
X7DBE+ (Standard Retail Pack)
MBD-X7DBE+-B
·
X7DBE+ (Bulk Pack)
Physical Stats
Form Factor
·
Enhanced Extended ATX
Dimensions
·
13.68" x 13" (34.7cm x 33cm)
Processor/Cache
CPU
·
Dual 771-pin LGA Sockets
·
Supports up to two
Intel® 64-bit Xeon®
processor(s) of the same
type below:
o
Quad-Core Intel®
Xeon®Processor
5400/5300 sequence
(Harpertown
/Clovertown processor)
up to 3.16 GHz
o
Dual-Core Intel®
Xeon®Processor 5200/5100/5000
sequence (Wolfdale
/Woodcrest/Dempsey processor)
up to 3.40 GHz
o
NOTE: Motherboard PCB revision 2.0 or above is required to support Xeon® 5100 (Woodcrest) processors
System Bus
·
1333 / 1066 / 667 MHz system bus
Operating System Software
·
Supports 64-bit Operating Systems
·
Supports 32-bit Operating Systems
System Memory
Memory Capacity
·
Sixteen 240-pin DIMM sockets
·
Supports up to 64 GB 667 / 533MHz DDR2 ECC FB-DIMM memory
·
Dual branch memory bus
·
Memory must be populated in pairs
·
Memory Mirroring supported
Memory Type
·
667 / 533MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
·
512 MB, 1GB, 2GB, 4GB
Memory Voltage
·
1.8V only
·
1.5V(AMB)
Error Detection
·
Corrects single-bit errors
·
Detects double-bit errors (using ECC memory)
·
Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
On-Board Devices
Chipset
·
Intel® 5000P (Blackford) chipset
·
MCH + PXH + ESB2
SATA
·
Intel ESB2 SATA 3.0Gbps Controller
·
RAID 0, 1, 5, 10 support (Windows Only)
·
RAID 0, 1, 10 support (Linux)
IPMI
·
Support for Intelligent Platform Management Interface v.2.0
·
200-pin IPMI slot (SIMLP)
·
(
Optional: AOC-SIMLP-B(+)
)
·
(
Optional: AOC-SIMLP-3(+)
) with 3rd LAN support
Network Controllers
·
Intel® (ESB2/Gilgal) 82563EB Dual-Port Gigabit Ethernet Controller
·
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
·
Intel® I/OAT
support for fast, scaleable, and reliable networking
Graphics
·
ATI ES1000 controller with 16 MB of video memory
Super I/O
·
Winbond 83627HG chip
Input / Output
Serial ATA
·
Six Serial ATA ports
·
Six SATA hard drives supported
IDE
·
Single EIDE channel supports up to two UDMA IDE devices (IDE-M, IDE-S) including CF(Compact Flash) Card
·
Compact Flash (40-pin connector, IDE 1, single channel) slot
·
Supports UDMA Mode 5, PIO Mode 4, and ATA/100
Floppy
·
1 Floppy controller; 1.44 MB, 2.88 MB
LAN
·
2x RJ45 LAN ports
USB
·
2x USB rear ports
·
3x USB internal headers
·
Total 5 USB 2.0 Compliant / 1.1 Compliant
VGA
·
1x VGA Port
Keyboard / Mouse
·
PS/2 keyboard and mouse ports
Serial Port / Header
·
1 Fast UART 16550 serial port
·
1 Fast UART 16550 serial header
Parallel Port
·
1 ECP / EEP parallel port
Chassis ( Optimized for X7DBE+ )
2U Chassis
·
CSE-825TQ-R700LPV
·
CSE-825TQ-560RCV
·
CSE-825TQ-R700RCV
Tower / 4U Rackmount
·
CSE-745TQ-R800
·
CSE-745TQ-800
Important Chassis Notes
·
To ensure system stability, a 700W (minimum) ATX power supply
[4-pin (+12V), 8-pin (+12V) and 24-pin are required]
Expansion Slots
PCI-Express
·
2 (x8) PCI-e slots
·
1 (x4) PCI-e (using x8) slot
·
1 SEPC (Supermicro PCI-e Power Connector) slot for 2U active riser cards with a power extension (i.e. CSE-RR2UE-AX)
PCI-X
·
2x 64-bit 133MHz PCI-X (3.3V) slots
·
1x 64-bit 100MHz PCI-X (3.3V) slot
System BIOS
BIOS Type
·
8Mb Flash EEPROM with Phoenix® BIOS
BIOS Features
·
Plug and Play (PnP)
·
SMBIOS 2.3
·
DMI 2.1
·
PCI 2.2
·
ACPI 1.0
·
USB Keyboard support
·
Hardware BIOS Virus protection
Management
Software
·
Optional IPMI (Intelligent Platform Management Interface) 2.0
·
SuperDoctor® III
·
Watch Dog
·
NMI
Power Configurations
·
ACPI Power Management
·
Main Switch Override Mechanism
·
Wake-On-Ring (WOR) header
·
Wake-On-LAN (WOL) header
·
Power-on mode for AC power recovery
·
Internal / External modem remote ring-on
PC Health Monitoring
Voltage
·
Monitors for CPU Cores, +3.3V, +5V, +5V Standby, & ±12V
·
5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
FAN
·
Total of four 3-pin and four 4-pin fan headers supporting up to 8 fans
·
8x fans with tachometer status monitoring
·
Status monitor for speed control
·
Status monitor for on/off control
·
Low noise fan speed control
·
Pulse Width Modulated (PWM) fan connectors
Temperature
·
Monitoring for CPU and chassis environment
·
CPU thermal trip support
·
Thermal Control for 8x fan connectors
·
PSU I
2
C temperature sensing logic
·
Thermal Monitor 2 (TM2) support
LED
·
CPU / System Overheat LED
Other Features
·
Chassis intrusion detection
·
Chassis intrusion header
·
SDDC Support
Operating Environment / Compliance
RoHS
·
RoHS Compliant 5/6, Server Exemption
Environmental Spec.
·
Operating Temperature: 10°to 35°C (50°to 95°F)
·
Non-operating Temperature: -40°to 70°C (-40°to 158°F)
·
Operating Relative Humidity: 8% to 90% (non-condensing)
·
Non-operating Relative Humidity: 5 to 95% (non-condensing)
OS Compatibility
• Please see our
OS Compatibility Chart